Epapermagazine: Type of Automotive Tools: Choose the right Supplier

When we talk of work, especially in the fabrication, repair, and manufacturing sector, we talk of tools. Without this essential item, no work will take place. You find tools in use in the automotive industry also. Here is a look at some of them.

Classes of automotive tools

Automotive tools help us repair and control the parts of the automotive parts. We can cut, fix, bend, or refabricate parts as per our need. The automotive tools fall into three categories. They are as follows:

• Puller
• Spanners
• Levers

You can see the different choices at the website of the automotive tools manufacturers in India. Let us see what each of the tools will do.

Puller

The bearing puller helps you take out a caged set. Usually this is from a rotating shaft. Sometimes it may be from a blind bearing hole. For instance, you may want to remove tapered bearings from the transmission of the car.

Spanner

This is a tool used to remove the nut from an assembly. The tool has a hole at one end with edges that sit around the perimeter of the nut. By choosing the right size, you can get the nut to turn using the lever end of the nut.

Lever

The lever is used for removing nails or for prying open things. This is used for removing the tyres on the wheel when you need to change it.,

The working of the puller is simple. You place the legs of the puller around the part that you must remove. Adjust the legs so that they remain tight around the part. Position the forcing screw. Turn this screw clockwise until it touches the shaft. Make sure the center of the screw and the center of shaft are aligned.

Turn the forcing screw slowly using a wrench or spanner. This will add force on the shaft. Keep turning the screw until the part you want to remove is coming off the shaft. Now, loosen the forcing screw by turning it anticlockwise, Remove the part by freeing the legs of the puller. Choose a good supplier so that you get the professional automotive tools for your work.

Types of spanners

The spanner is used to loosen or tighten the nuts and bolts in an assembly. The different types of spanners include these:

• Slogging spanner
• Deep offset ring slogging spanner
• Gas spanner
• Flare nut spanner
• Double open ended spanner
• Combination spanner
• Ring spanner
• Single open ended spanner

When you want to loosen or tighten large nuts, you need a slogging hammer. The operation is safer when two people do the work. The design of the slogging hammer is such that it is positioned in between in the contact zone between the spanner and the traditional hammer. You can use pneumatic or electrical tools to automatically loosen or tighten the bolt. But, in a few cases, you must do it manually.

There is an imminent danger of crushing your hands when the hammer contacts your body. You must hold the slogging spanner in place and then strike it with a heavy hammer. Holding it down will help to prevent slippages and damages due to the impact of the flying hammer or spanner when it slips off the nut.